Is it worth restoring an old bike? How to do bike restoration


Of course, as long as its parts are available in the market, renovating a dirt bike is quite a good decision. If you rebuild your motorcycle every year, like changing wires, fixing all internal damages and keep lubricating, it can extend their life. Also, if your bike is still at the best price, you can make it as new for sale to get the sufficient amount. Also, it will cost you around $1500 to replace the crank, piston, cam chain, engine or cylinder head, etc. 

Are you thinking of renovating your old dirt bike? It’s really a smart and helpful decision to save money from purchasing a new bike. Also, you can check what value your current bike is holding in the market with a good condition.

The brilliant idea is that a well managed and includes all parts can give you enough amount with which you can buy a new one by adding a few more money. So, keep maintaining your motorcycle and how to do so, see today’s post. 

What you need to do for the restoration of an old bike?

Let me tell you some tips that will help you to renovate your old dirt bike. And also these suggestions may consume you a lot of time, but at least these would be workable. Else wasting your time without the proper tools is like going for an exam without a pen. Below, I’m listing those tips, understand them and follow them strictly to do your work on time. 

Budget For Restoration

For every mechanical task, you will always need amounts for tools and parts. Same here will be applicable, do a correct calculation whether restoring will be a good option or it will charge you more than a new brand bike. Make a list of which parts you should change and how much its price is in the market. Once you inspect the whole budget, now collect it based on your monthly payments or daily expenses. So, this first tip is only on how you rebuild your motorcycle with a minimum budget but with good parts. 

Proper Tools

Which socket set of wrenches will be required for restoration, find about each nut bolt and then decide for the tool you will need to lose it or open it up. If you are thinking of borrowing from somewhere, you can but make sure that tools surely open the bike parts.  As you can’t use a wiper to clean your clothes, in the same way you need to buy or take the proper tools to rebuild your old motorcycle. 

Gain Experience With Japanese Dirt Bikes

For your first time, try on Japanese branded bikes, such as Yamaha and Honda. Actually, these dirt bikes are easy to restore and also less parts will be required. Japanese bike’s structures are simple, which is a good option for a beginner. Once you complete the renovation process with these motorcycles, it means you will be able to try on complicated bikes as well. 

Next Trial On European Branded Bikes

As you have done with the Japanese bikes, move forward for European companies. These motorcycles are difficult to handle and parts are also not easily available. But make sure you will restore it before collecting parts and proper tools, it would be expensive and take more time. 

Buy Old Running Bike

If you don’t have your bike, you can buy the used one which is completely okay with parts and running systems. What benefits you will get with such motorcycles are that you just need to dress it up, no need to change the engine or internal parts as these could be a little bit harder. So, for gaining experience, start with something small, if you buy something that is not running, you won’t find the main reason and get frustrated. 

Design or Search The Picture Of Rebuild Motorcycle

Yeah, you have to do that, what kind of look you want for your bike, its colour, speed and design. Either design on your own or download it from searching online. This step will help you to gather the equipment and tools which can turn your bike exactly the same. 

Take Pictures Before Restoration

For restoring your dirt bike, you will first remove its cover or frame and later disassemble the internal parts and connecting wires. But, if you are not experienced enough, definitely forget which part belongs to where. These pictures will find the original position of the parts and are also helpful in connections. 

Labelling Parts

The next thing you can do is either labelling or numbering, like after that this or that. This smart technique will save time and also won’t make you frustrated. Along with wires, label nut-bolts as well. Which belongs to where and put them in separated paper or plastic baggies. 

Put Down The Tank

The first part which you will remove is the tank, after putting off the tank. You can easily work on restoration. Don’t put it back until you finish the process, it will save your tank from further damages which can happen during renovation. 

Paint The Bike

How can you give a new look to your motorcycle with just a single step? The only answer is painting, yes this is the basic step of restoration. Only two parts are painted in any bike and those are tank & frame. Painting a bike is easy, you just buy the suitable tools, colours and dent removal sprays. 

Focus On One Task

As you are going to rebuild your bike, make a to-do list so that there will be no messed up. First, remove the tank, then clean all parts, later change damaged parts, remove rusts, painting, etc. These kinds of tasks you will do for restoration, but don’t do all of them together, it will create confusion and take a lot of time. 

Cover With Respirator

You must have seen, people who paint vehicles wear special kinds of face covers and even full uniform. If you are going to paint your motorcycle, cover it with a respirator to protect your skin and eyes from the harmful gases that will be released while painting the bike. 

Remove Rust

You can use any kind of lubricant or sandpaper to see the parts clearly. It will make the painting easy and also before clearing rusting will be helpful for paints to stay more. Although paint restricts rust, if you brush on the rusted material, there is no meaning. 

Empty The Tank Before Proceeding-

If the tank is full, it may be dangerous. So, kindly empty it before starting your task. Or the second situation is that the tank was empty but full of rust and dust due to carelessness. Use sandpaper to clean it or inside the corners, you will need special kinds of rust remover liquids, use it. 

Check Wire Connections

All set but still the bike is not starting, inspect all wire connections. You might have connected the wrong wire or something you had forgotten. One more issue can be possible that the wires were producing firing or sparking. Sort it out quickly else you may put your two-wheeler and your life in danger. 

Clean All Parts

During renovating your bike, it will produce dust and dirt on your bike. When you complete the process, clean all the parts using good quality based solutions. Use aerosol for the tank, grease for the frame and don’t forget to paint the rims after mounting the tires. 

Return Extra Motorcycle Parts

It’s old words that keep extra for any new work, obviously, you too brought extra materials. Return it to the same place, and one more way from where you can raise some funds. Like there are a lot of people who reuse scrap parts, sell them instead of throwing them into the dustbin. 

Do I Need Mechanics For Restoration Of An Old Bike?

It’s not always mandatory, if you have a little bit of experience restoring your bike, you can do the same alone. There are a few parts where you need a mechanic to fix it and to rebuild an engine, you will also need help from your mechanic.

Don’t take an engine just for trial, it wouldn’t be a good idea unless you know how to sort out the problem of a used engine. In the end, you tried hard to renovate but failed repeatedly, you can ask for the help from motorcycle mechanics. There are experts and nice people. 

How To Sell A Renovated Dirt Bike? 

When you have done restoration to an old bike, you can sell it via many paths. The first place is Craigslist, any individual is interested in buying used dirt bikes, they are always surfing this site. The next place you can use online marketing, like Facebook marketing and eBay like sites. Click a perfect picture from each angle and put it on the above-mentioned platforms with details. 

Note:- Restoring a dirt bike is a good thought but before putting your hand into it, make sure the bike isn’t outdated else there will be no meaning to transform it into a new one. 

Conclusion

I think you get all the answers for; Is it worth restoring an old bike or not. Not only that, you even crossed through procedures and ideas to do the same. To get more posts related to dirt bikes, subscribe to our newsletter and keep your eyes on your motorcycle to never let it die. 

Sources:

how_old_is_too_old_when_purchasing_a_used_dirt, how much does it cost to rebuild your four stroke dirt bike engine, motorcycle restoration tips and tricks, is rebuilding a blown up motor yourself worth it. how to dirt bike restoration

Thomas A. Talley

I’m Thomas. Since childhood, I am fond of bikes and hence dirt bikes are my passion now. Ever since then, I’ve been giving advice to the beginners and this has become my hobby.

Recent Posts